1-120
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
.
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional. However, some models include certain peripheral devices as standard
equipment.
(As of December, 2016)
PERIPHERAL DEVICES
Product name
Product
number
Description
Large capacity tray MX-LC12 Additional tray. A maximum of 3500 sheets of paper can be
placed.
MX-LCX3 N Additional tray. A maximum of 3000 sheets of paper can be
placed.
Large capacity trays MX-LC13 N Additional tray. A maximum of 5000 sheets of paper can be
placed.
Paper pass unit MX-RB12
This unit is required for installing a finisher or saddle stitch finisher.
MX-RB14 This unit is required to facilitate connection of large capacity trays.
Multi bypass tray MX-MF11 Additional tray. A maximum of 500 sheets of paper can be
placed. Install this tray on the large capacity trays.
Exit tray unit MX-TR14 Output tray to be installed in the right of the machine.
Exit tray cabinet MX-TU14 Output tray to be installed in the center of the machine. This unit is
required when a finisher or saddle stitch finisher is not installed.
Long paper feeding tray MX-LT10 When using long paper, the long paper is loaded in the bypass
tray.
Finisher (50-sheet stapling) MX-FN19 Output device that enables the use of the staple function and
offset function. A maximum of 50 sheets of paper can be stapled.
Finisher (100-sheet stapling) MX-FN21 Output device that enables the use of the staple function and
offset function. A maximum of 100 sheets of paper can be stapled.
Saddle stitch finisher
(50-sheet stapling)
MX-FN20 Output device that enables use of the staple function, offset
function and pamphlet copy function. A maximum of 50 sheets of
paper can be stapled.
Saddle stitch finisher
(100-sheet stapling)
MX-FN22 Output device that enables use of the staple function, offset
function and pamphlet copy function. A maximum of 100 sheets of
paper can be stapled.
Punch module MX-PN12B This unit punches holes in copies and other output. A finisher
(50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is
required.
MX-PN13B This unit punches holes in copies and other output. A finisher
(100-sheet stapling) or saddle stitch finisher (100-sheet stapling)
is required.
Trimming module MX-TM10 This unit trims the excess portions of saddle-stitched sheets. A
saddle stitch finisher (100-sheet stapling) is required.
To Next Page
Loading...
