Sharp MX-6580N

2-7
COPIER►BEFORE USING THE MACHINE AS A COPIER
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
1
Switch to copy mode.
► SELECTING COPY MODE (page 2-4)
Maximum print area: 12-9/16" x 50-7/8" (319 mm x 1292 mm)
2
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-92)
► DOCUMENT GLASS (page 1-94)
3
Select functions.
Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
If necessary, you can refer to the following functions for the setting.
In Easy mode In Normal mode
• Paper Select ►page 2-13
• 2-Sided Copy ►page 2-17
• Copy Ratio ►page 2-26
• Staple / Punch ►page 2-48, ►page 2-53
• Color Mode ►page 2-20
• Original ►page 2-33
• Exposure ►page 2-23
•N-Up ►page 2-61
• Card Shot ►page 2-65
• Color Mode ►page 2-20
•Original ►page 2-33
• Paper Select ►page 2-13
• 2-Sided Copy ►page 2-17
• Copy Ratio ►page 2-26
• Exposure ►page 2-23
• Output ►page 2-41
•Others ►page 2-72
B/W
Start
Color
Start
Original
8½x11
Detail
Staple / PunchCopy Ratio2-Sided Copy
Paper
Select
8½x11
Tray 1 1 → 1
100% Off
Preview
Copies
CA
Others
Send and Print
Call Eco Program
Store Data in Folder
File
Store Data Temporarily
Quick File
1
No. of copies
Original
Auto 8½x11
Paper Select
Auto
Exposure
Auto
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
Color Mode
Full Color
Start
Color
Start
B/W
Plain 1
8½x11
21
3
4
5
8½x11 8½x11
11x17
8½x14
8½x11
Proof Copy
CAPreview
No. of copies