2-41
COPIER►BASIC PROCEDURE FOR MAKING COPIES
OUTPUT
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify
the output destination of copies.
You can tap the [Output] key in normal mode to configure settings for all output functions.
Settings for the staple and punch functions can also be configured from simple mode.
Output Tray
Specify the destination to output copies.
If a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) is installed, you can select [Upper Tray],
[Middle Tray], or [Lower Tray].
If a finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is installed, you can select [Upper Tray] or
[Lower Tray].
► CHANGING OUTPUT DESTINATION (page 2-43)
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to enables the offset function, and
setting it to
disables the function.
This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray] or [Lower Tray] is selected as
the output tray.
Selecting the staple function clears the Offset checkmark automatically.
Start
Color
Start
B/W
3
4 11x17
8½x14
8½x11
Proof Copy
Preview CA
Others
Upper Tray
Sort
Group
Lower Tray
Output Tray
Output
Auto
Sort/Group
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
Offset
No. of copies
Staple Punch Fold
Separator Page
Middle
Tray
2-Sided Copy
[Output] screen of normal mode
Offset enabled Offset disabled
To Next Page
Loading...
