1-133
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
Saddle stitch unit
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Before starting this procedure, remove all output from the output tray of the saddle stitch finisher (50-sheet stapling). Do
not replace removed output back in the output tray.
6
Push the staple case firmly back in.
Push the staple case in until it clicks into place.
7
Close the front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
1
Open the front cover.
To Next Page
Loading...
