2-37
COPIER►BASIC PROCEDURE FOR MAKING COPIES
5
Tap a key ( ) for storing a
custom original size.
Tap a key that does not show a size.
To modify or delete a previously stored key:
Tap the key that you want to modify or delete. The following screen will appear.
• To modify the key, tap the [Modify] key and go to the next step.
• To delete the key, tap the [Delete] key. Make sure that the original size has been cleared and tap the key.
6
Specify the original size.
Tap the areas displaying width and height sizes respectively,
and enter the sizes using the numeric keys.
It is convenient to use to finely adjust the entered size.
7
Tap the [Execute] key
After the settings are completed, tap the key, and check that the key of the size stored on the original screen is
added properly. After you have checked it, tap .
To cancel the operation:
Tap the [CA] key.
Start
Color
Start
B/W
3
4 11x17
8½x14
8½x11
Proof Copy
Preview CA
Store/Delete
Select the size key to store/delete
the custom original size.
Others
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
1
No. of copies
Original
Background Adjustment
2-Sided Copy
Color Mode
Store/Delete
Select the size key to store/delete
the custom original size.
Others
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Color Mode
X420 Y297
A custom size has already been stored
in this location.
Delete ModifyCancel
Original
Start
Color
Start
B/W
3
4 11x17
8½x14
8½x11
Proof Copy
Preview CA
No. of copies
Size Input
Enter Size to Register.
Others
11
17
( 1~11 5/8 )
inch
( 1~17 )
inch
X
Y
Execute
Original
1
Start
Color
Start
B/W
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Color Mode
3
4 11x17
8½x14
8½x11
Proof Copy
Preview CA
To Next Page
Loading...
