2-50
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Stapling each set of sorted copies
The setting procedure in normal mode is explained.
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Tap the [Output] key.
3
Tap the [Staple] tab, and tap the staple
position key.
Tap the [Original] key to chenge the original settings.
Staple position can be selected from "Position" when
selecting keys other than [Off], and [Saddle Stitch].
After the settings are completed, tap .
If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Continue] or [Cancel]
key.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
To cancel the staple function:
Tap the [Off] key.
Start
Color
Start
B/W
3
4 11x17
8½x14
8½x11
Proof Copy
Preview CA
Off
1 Staple
2 Staples
Original
Left
To p
Right
Position
Others
Upper Tray
Lower Tray
Output Tray
Output
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
Offset
No. of copies
Separator Page
Sort/Group Staple Punch Fold
Saddle
Stitch
Trimmer
Setting
Middle
Tray
2-Sided Copy
To Next Page
Loading...
