2-101
COPIER►OTHER FUNCTIONS
2
Change settings as needed.
3
Place the original in the document
feeder tray of the automatic document
feeder, and tap the [Start] key to scan
the first original.
• Insert the originals all the way into the document feeder
tray. Originals can be stacked up to the indicator line.
► AUTOMATIC DOCUMENT FEEDER (page 1-92)
• To initially make only one copy to check the output, tap
the [Proof Copy] key.
► MAKING A PROOF COPY (PROOF COPY) (page
2-142)
4
Place the next set of originals and tap
the [Start] key.
Repeat this step until all originals have been scanned.
• To change copy settings for each set of originals, tap the [Change Setting] key.
For more information, see "Changing the copy settings for each set of originals (page 2-102)
.
• If you tap the [Preview] key, you cannot scan additional pages.
5
Repeat until all pages have been scanned and check the preview image in the
preview screen.
To cancel all settings:
Tap the [CA] key.
6
Tap the [Read-End] key to start copying.
A4
100%
CAPreview
Start
Original
Auto 8½x11
Paper Select
Auto
Exposure
Auto
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
Color Mode
Full Color
A4
100%
Others
Enter and Return.
Change to B/W
Send and Print
Register Current Settings
Program Registration
Store Data Temporarily
Quick File
A4
Change Setting
Place next original.
Press [Start] to scan original.
[Change Setting]:
Change setting of next original.
[Preview]:
Finish scan and display preview.
Preview Read-End
8½x11
21
3
4
5
8½x11 8½x11
11x17
8½x14
8½x11
To Next Page
Loading...
