1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(12) Finisher (50-sheet stapling)*
This staples and outputs paper.
► FINISHER (50-SHEET STAPLING) (page 1-122)
(13) Saddle stitch finisher (50-sheet stapling)*
This staples and folds paper.
► SADDLE STITCH FINISHER (50-SHEET
STAPLING) (page 1-130)
(14) Status indicator*
The status of the machine is indicated.
► STATUS INDICATORS (page 1-151)
(15) Right tray*
As required, paper can be output into the right tray.
Outputting received fax printouts into the right tray allows
you to separate them from other printed paper.
(16) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page
1-83)
(17) Punch module (MX-PN12B)*
This punches and outputs paper.
(18) Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
(19) Tray 5 (MX-LCX3 N)*
Store paper in this tray. Up to 3000 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
*Optional
(18)(17) (19)
(12) (13)
(14) (15) (16)
To Next Page
Loading...
