8-20
SYSTEM SETTINGS►SETTING MODE LIST
* When an internet fax expansion kit is installed
Fax Data Receive/Forward (Manual)
*1 When a facsimile expansion kit is installed
*2 When an internet fax expansion kit is installed
Inbound Routing (Forwarding/Storing) Settings
•Password – No Yes
- Change Password Disabled No Yes
• POP3 Communication Timeout 60sec. No Yes
• Reception Check Interval Setting 5 minutes No Yes
• Enable SSL Disable No Yes
Default Settings No Yes
• I-Fax Own Name and Address Set No Yes
- Set I-Fax Own Name – No Yes
-Own Address – No Yes
• Direct SMTP Setting No Yes
- Port Number (Receive) 25 No Yes
- Timeout 300 seconds No Yes
- Port Number (Send) 25 No Yes
- Timeout 300 seconds No Yes
Setup Items Factory default setting U A
● Fax Data Receive/Forward (Manual) (page 8-109)
X Fax Settings*
1
See "Fax Data Receive/Forward
(Manual) (page 8-191)".
Yes Yes
X Internet Fax Settings*
2
Yes Yes
Reception Start – Yes Yes
Manual Reception Key in Initial Screen Enabled Yes Yes
Forward Received Data – Yes Yes
Setup Items Factory default setting U A
● Inbound Routing (Forwarding/Storing) Settings (page 8-110)*
X Inbound Routing Settings Yes Yes
Display Items
10
Yes Yes
Table Registration Yes Yes
• Table Name – Yes Yes
Sender Settings for Received Data Yes Yes
• Receive Line Select Yes Yes
- Internet Fax
Enabled
Yes Yes
-Fax
Enabled
Yes Yes
Setup Items Factory default setting U A
To Next Page
Loading...
