8-48
SYSTEM SETTINGS►SETTING MODE LIST
*1 This setting is configured in setting mode on the machine.
*2 This setting is configured in setting mode on the web page.
Initial Installation Settings
U: General user; A: System administrator/Administrator
Sharpness 3 (Normal) No Yes
Contrast 3 (Normal) No Yes
X Color Profile Settings*
2
– No Yes
X Common Functions*
1
– No Yes
Auto Color Calibration (for Copy) – No Yes
Auto Color Calibration (for Print) – No Yes
Copy Calibration by Screen – No Yes
Printer Calibration by Screen – No Yes
Density Smoothing Adjustment Middle No Yes
Setup Items Factory default setting U A
● Initial Installation Settings
X Condition Settings No Yes
Name – No Yes
Machine Code – No Yes
Machine Location – No Yes
Memo – No Yes
Clock Adjust – No Yes
• Current Date – No Yes
• Specify Time Zone – No Yes
• Date&Time Settings – No Yes
• Synchronize with Internet Time Server Disabled No Yes
Daylight Saving Time Setting – No Yes
Preheat Mode Setting 1min. No Yes
• Turn off Panel Display during pre-heat mode Enabled No Yes
Auto Power Shut-Off Enabled No Yes
• Fix transition time. Enabled No Yes
Display Message When Extending Transition Time to
Preheat/Auto Power Shut-Off Mode
Disabled
No Yes
Sleep Mode Power Level Low Power No Yes
X Network Quick Settings – No Yes
X Paper Tray Settings – No Yes
X Product Key – No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
