1-81
BEFORE USING THE MACHINE►LOADING PAPER
Changing the paper size
3
Place the tab paper guide.
Place the guide on the top of the tab paper.
4
Gently push the tray into the machine, and set the paper type to tab paper.
Using "Paper Tray Settings" in the system settings, set the paper type to tab paper.
To set the paper type to tab paper:
Set this in [Tray Settings] in the home screen or in "Settings", select [System Settings] → [Common Settings] → [Paper
Settings] → [Paper Tray Settings].
1
Loosen the paper guide screw.
2
Slide the plate of the paper guide.
Slide the plate until the red line appears at the center of the
size window of the plate.
Both near and far plates slides when you slide one of those.
To Next Page
Loading...
