Use this to sound a beep when a base setting is
selected.
This mode reduces toner usage by about 10% when
copying. Toner save mode is effective when the
exposure mode is AUTO or TEXT.
This is used to adjust the exposure level.
The automatic exposure level can be adjusted
separately for the document glass and the
SPF/RSPF.
The factory default setting for the exposure level
is "center".
1: US ENG.
2: ENGLISH
3: FRENCH
4: SPANISH
5: GERMAN
This is used to set the language used in the display.
This is used to return all settings to the factory
default settings.
Use this setting to enable or disable sort auto select
mode.
CHECK OC
OPEN:
CHECK RSPF
OPEN
You can set the operation that takes place if the
[Start] key is pressed when the RSPF is not
completely closed.
1. LARGE
(A4/LTR)
2. SMALL
(B5R/INV)
Set the allowed paper sizes when copying from the
bypass tray. When 5.5x8.5 is selected, a copy of the
letter size original will only be printed up to invoice
size.
Select whether copying is allowed when the polygon
motor is rotating or stopped
Set the temperature of the fusing unit when the
bypass tray is used. Normally, “Heavy Paper” should
be used.
1. LIGHTER
2. LIGHT
3.NORMAL
4.DARK
5. DARKER
Sets the contrast of the display.
This function is enabled when MX-NB11
(Network Expansion Kit) is installed
This function is enabled when MX-NB11
(Network Expansion Kit) is installed