7-10
SYSTEM SETTINGS►SETTING MODE LIST
* When an inner finisher is installed
Disabling sending while copying Disabled No Yes
High Quality Scan from Document Feeder Disabled No Yes
Quick Scan from Document Glass Disabled No Yes
Auto Clear Before Copy Execution Also Disabled No Yes
Initial Status Settings No Yes
Image Orientation Landscape No Yes
Paper Tray Varies depending on the machine
configuration
No Yes
Exposure Type Auto No Yes
• Copy of Copy Disabled No Yes
Copy Ratio 100% No Yes
• Select magnification automatically according to
paper size, when paper tray is selected.
Disabled
No Yes
2-Sided Copy 1-Sided→1-Sided No Yes
Original Binding Book No Yes
Output Binding Book No Yes
Output Tray Varies depending on the machine
configuration
No Yes
Offset Enabled No Yes
Separator Page No Yes
• Insert Before Job Disabled No Yes
• Insert After Job Disabled No Yes
Staple Sort* 1 Staple No Yes
Text /Image Printing No Yes
Text Settings (Stamp) – No Yes
Custom Stamp – No Yes
Custom Watermark – No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
Need help?
General
