To Next Page

To Previous Page

7-19

SYSTEM SETTINGS►SETTING MODE LIST

* When an internet fax expansion kit is installed

Fax Data Receive/Forward (Manual)

* When an internet fax expansion kit is installed

 Server Settings No Yes

 Receive Settings No Yes

• Internet Fax Receive Enabled No Yes

• POP3 Server – No Yes

• Port Number 110 No Yes

• POP Authentication Disabled No Yes

• User Name – No Yes

•Password – No Yes

- Change Password Disabled No Yes

• POP3 Communication Timeout 60sec. No Yes

• Reception Check Interval Setting 5 minutes No Yes

• Enable SSL Disable No Yes

 Default Settings No Yes

• I-Fax Own Name and Address Set No Yes

- Set I-Fax Own Name – No Yes

-Own Address – No Yes

• Direct SMTP Setting No Yes

- Port Number (Receive) 25 No Yes

- Timeout 300 seconds No Yes

- Port Number (Send) 25 No Yes

- Timeout 300 seconds No Yes

Setup Items Factory default setting U A

● Fax Data Receive/Forward (Manual) (page 7-107)

 Fax Settings See "Fax Data Receive/Forward

(Manual) (page 7-181)".

Yes Yes

 Internet Fax Settings* Yes Yes

 Reception Start – Yes Yes

 Manual Reception Key in Initial Screen Enabled Yes Yes

 Forward Received Data – Yes Yes

Setup Items Factory default setting U A

Sharp MX-B455W User Manual

Other manuals for Sharp MX-B455W