7-47
SYSTEM SETTINGS►SETTING MODE LIST
Image Quality Adjustment
U: General user; A: System administrator/Administrator
* This setting is configured in setting mode on the machine.
Setup Items Factory default setting U A
● Image Quality Adjustment (page 7-168)
Collective Adjustment No Yes
Fusing Cleaning Mode* – No Yes
Black Letter/Black Line Width Adjustment 0 No Yes
Black Streak Reduction Disabled No Yes
Display warning message for black streaks detection. Disabled No Yes
Copy Image Quality No Yes
Quick Image Quality Adjustment 2 No Yes
Gray Balance All 0 No Yes
Density Adjustment when [Auto] is selected for
Exposure
Document Glass, Document
Feeder: 5 (Normal)
No Yes
Sharpness 2 No Yes
Image Quality Priority No Yes
•Auto 0 No Yes
• Text/Prtd.Photo 0 No Yes
Print Image Quality No Yes
Quick Image Quality Adjustment 2 No Yes
Gray Balance All 0 No Yes
Exposure Adjustment 3 (Normal) No Yes
Line Thickness 5 No Yes
Scan Image Quality No Yes
RGB Adjust All 0 No Yes
Sharpness 3 (Normal) No Yes
Contrast 3 (Normal) No Yes
Common Functions* – No Yes
Auto Gray Calibration (for Copy) – No Yes
Auto Gray Calibration (for Print) – No Yes
Copy Calibration by Screen – No Yes
Printer Calibration by Screen – No Yes
To Next Page
Loading...
