Sharp MX-C300F - Page 155

MX-C250 SIMULATION 6 – 78
70 1 - 2 FAX initial setting Reception Lamp Pattern1 0 0 0
Pattern2 1 0 1
Pattern3 1 1 0
3 - 5 FAX initial setting Call sound number Setting range
0 - 15times (Japan, Taiwan,
North America, Malaysia,
India)
2 - 4 times (New Zealand, Aus-
tralia)
0 - 3 times (Singapore)
0 - 9 (Other countries than
above countries)
Two states input
7 FAX reception
setting/ Setting
Setting for changing over to auto-
matic reception during manual
reception
0 : Prohibited 1 : Permitted
8 FAX initial setting Paper tray setting (Tray 1) 0 : OFF 1 : ON
71 1 FAX initial setting Paper tray setting (Tray 2) 0 : OFF 1 : ON
2, 3 FAX initial setting Output setting Reduce the size 0 0
Same size 0 1
Separate 1 0
4 FAX reception
setting
Double-faced printing of received
data (double-faced reception set-
ting)
0 : Prohibited 1 : Permitted
5 Setting of size selection in A4 data
reception (AB series)
0 : 210mm with printing 1 : 8.5 inch printing
6 FAX reception
setting
Specified number reception
Enable/Disable setting
0 : Reception Enable 1 : Reception Disable
7 FAX initial setting Polling protection 0 : Protect 1 : Do not protect
8 Not used
72 1 - 4 FAX initial setting FAX copy off center adjustment
(SPF)
0 dot 0 0 0 0
7 dot 0 0 0 1
14 dot 0 0 1 0
21 dot 0 0 1 1
28 dot 0 1 0 0
35 dot 0 1 0 1
42 dot 0 1 1 0
49 dot 0 1 1 1
0 dot 1 0 0 0
- 7 dot 1 0 0 1
-14dot 1 0 1 0
- 21 dot 1 0 1 1
- 28 dot 1 1 0 0
- 35 dot 1 1 0 1
- 42 dot 1 1 1 0
- 49 dot 1 1 1 1
72 5 - 8 FAX initial setting FAX copy off center adjustment
(OC)
0 dot 0 0 0 0
7 dot 0 0 0 1
14 dot 0 0 1 0
21 dot 0 0 1 1
28 dot 0 1 0 0
35 dot 0 1 0 1
42 dot 0 1 1 0
49 dot 0 1 1 1
0 dot 1 0 0 0
- 7 dot 1 0 0 1
-14dot 1 0 1 0
- 21 dot 1 0 1 1
- 28 dot 1 1 0 0
- 35 dot 1 1 0 1
- 42 dot 1 1 1 0
- 49 dot 1 1 1 1
73-
80
Not used
81 1 - 4 Adjustment value Signal sending level 0 - 15 dBm
5 - 8 Not used
SW
No.
Bit
No.
System set-
tings
Item SW selection and function Remarks