43
INSTALLING THE SCANNER DRIVER
3
When the finish setup window appears, click the [OK] button.
4
Click the [Close] button in the window of step 1.
This completes the installation. Next, configure the IP address of the
machine in the scanner driver.
When the scanner driver is installed, the "Select Device" utility is also installed.
The IP address of the machine is configured in the scanner driver using "Select
Device".
5
Click the [start] button, select [All Programs] ([Programs] in Windows
98/Me/2000), select [SHARP MFP TWAIN V], and then select [Select
Device].
6
Click the [Search] button.
If you know the IP address, you can
click the [Input] key and enter the IP
address without searching.
After the installation, a message prompting you to restart your computer may
appear. If this message appears, click the [Yes] button to restart your computer.
!mxc381_us_ins.book 43 ページ ２００８年８月１９日 火曜日 午前１０時４２分
To Next Page
Loading...
Need help?
General
