32
REPLACING SUPPLIES AND MAINTENANCE
Scanning area
If colored lines or white lines appear in images scanned using the automatic
document feeder, clean the scanning area (the thin long glass next to the
document glass).
Cleaning the main charger of the photoconductive drum
If black lines or colored lines appear even after you have cleaned the document glass
and automatic document feeder, use the charger cleaner to clean the main charger.
1
Press the [POWER] key ( ) on the operation panel
to turn off the panel power, and then switch the
main power switch to the off position.
2
Open the front cover and remove the toner collection
container.
☞ Replacing the toner collection container (page 15)
mxc401_us_saf.book 32 ページ ２００８年１０月１５日 水曜日 午前１１時５２分
To Next Page
Loading...
