64
SPECIFICATIONS
Printer specifications
*1 When the machine is used as a PostScript printer.
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000 / Server 2003 / XP / Vista /
Server 2008.
*5 To install the XPS expansion kit, an expansion memory board is required.
Type
Built-in
Continuous
printing speed
Same as continuous copying speed (When printing same
document continuously on 8-1/2" x 11" (A4) plain paper in
non-offset mode, excluding processing time.)
Printing
resolution
600 x 600 dpi / 1200 x 1200 dpi
Printer driver
type
PCL5c, PCL6, PostScript 3 compatible*
1
, XPS*
2
Supported
protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client
PC operating
systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software
Setup Guide.
Fonts
PCL5c, PCL6
80 European fonts, 28 barcode fonts*
3
, 1
bitmap font
PostScript 3
compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
4
Memory
Standard system memory: 512 MB
Expansion memory: 1 GB*
5
Print area
Entire page excluding margin of 11/64" (4.2 mm) at each edge.
The actual print area may vary depending on the printer driver and
the software application.
mxc401_us_saf.book 64 ページ ２００８年１０月１５日 水曜日 午前１１時５２分
To Next Page
Loading...
