60
MAC OS 9.0 - 9.2.2
10
Select the PPD file.
(1) Click the PPD file for your model.
(2) Click the [Select] button.
11
Make sure that the machine is selected in the "Select a PostScript
Printer" list and then click the [Setup] button.
12
Click the [Configure] button.
• If the above dialog box does not appear and you return to the "Chooser"
dialog box, follow these steps to select the PPD file manually.
(1) Make sure that the machine is selected in the "Select a PostScript Printer"
list, and then click the [Setup] button followed by the [Select PPD] button.
(2) Select the PPD file for your model and click the [Open] button.
(3) Click the [OK] button.
•
The PPD file is installed in the [Printer Descriptions] folder in the [Extensions] folder.
To automatically configure the settings based on the installed machine options
that are detected, click the [Auto Setup] button.
(1)
(2)
!mxc381_us_ins.book 60 ページ ２００８年８月１９日 火曜日 午前１０時４２分
To Next Page
Loading...
Need help?
General
