Sharp MX-C400P Software Setup Guide

50
MAC OS X
X Printing using the IPP function
The machine can print using the IPP function. If you wish to use the IPP
function, follow these steps to select the PPD file when configuring the printer
driver (step 14 on page 47).
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6, click the [IP] icon.
(2) Select [Internet Printing Protocol] in "Protocol". Enter the address
of the machine (IP address or domain name) and the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and click the PPD file of your
model.
If you are using Mac OS X v 10.5 to 10.5.8 or v10.6, select [Select a driver to
use] (or [Select Printer Software]) from "Print Using" and click the PPD file for
your model.
(4) Click the [Add] button.
The "Installable Options" screen will appear. Make sure that the settings are
correct and click the [Continue] button.
☞ Checking the IP address of the machine (page 6)
v10.4.11, v10.5 - 10.5.8, v10.6
(1)
(2)
(4)
(3)
03_Setup.fm 50 ページ ２００９年１０月９日 金曜日 午後５時２５分

Sharp MX-C400P Specifications

General

Brand	Sharp
Model	MX-C400P
Category	Printer
Language	English