Sharp MX-C507P - Environmental information

5028
243 paper jam messages
Diagnostics and troubleshooting
141
Error code
Description
Action
243.31
Paper fed from tray 3 remains detected at the
sensor (tray 3 pass ‑ through) or at the sensor (tray
3 trailing edge) after the printer is turned on.
See “Sensors (tray [x] trailing edge and
pass-through) static jam service check” on
page 144 .
243.32
Paper fed from tray 3 was detected earlier than
expected at the sensor (tray 3 pass-through) or at
the sensor (tray 3 trailing edge).
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper arrived too early
service check” on page 145 .
243.34
Paper fed from tray 3 cleared the sensor (tray 3
pass-through) or the sensor (tray 3 trailing edge)
earlier than expected.
See “Sensors (tray [x] trailing edge and
pass-through): Paper cleared too early
service check” on page 151 .
243.35
Paper fed from tray 3 cleared the sensor (tray 3
pass-through) or the sensor (tray 3 trailing edge)
later than expected.
See “Sensors (tray [x] trailing edge and
pass-through): Paper cleared too late
service check” on page 153 .
243.36
Paper fed from tray 3 was picked but it never
arrived at the sensor (tray 3 trailing edge).
See “Sensor (tray [x] pass-through): Tray [x]
failed to pick service check” on page 155 .
243.37
Paper fed from tray 3 never cleared the sensor
(tray 3 trailing edge).
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper failed to clear service
check” on page 158 .
243.38
Paper fed from tray 3 was detected later than
expected at the sensor (tray 3 pass-through) or at
the sensor (tray 3 trailing edge).
See “Sensors (tray [x] trailing edge and
pass-through): Paper arrived too late
service check” on page 160 .
243.41
Paper fed from tray 4 remains detected at the
sensor (tray 3 pass ‑ through) or at the sensor (tray
3 trailing edge) after the printer is turned on.
See “Sensors (tray [x] trailing edge and
pass-through) static jam service check” on
page 144 .
Error code
Description
Action
242.93
Paper never arrived at the sensor (tray 2 pass-
through). Paper source is undetermined.
See “Sensor (tray 2 pass-through): Paper
failed to arrive service check” on page 147 .
242.94
Paper cleared the sensor (tray 2 pass-through) or
the sensor (tray 2 trailing edge) earlier than
expected. Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass-through): Paper cleared too early
service check” on page 151 .
242.95
Paper cleared the sensor (tray 2 pass-through) or
the sensor (tray 2 trailing edge) later than
expected. Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass-through): Paper cleared too late
service check” on page 153 .
242.96
Paper was picked but it never arrived at the sensor
(tray 2 trailing edge). Paper source is
undetermined.
See “Sensor (tray [x] pass-through): Tray [x]
failed to pick service check” on page 155 .
242.97
Paper never cleared the sensor (tray 2 trailing
edge). Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper failed to clear service
check” on page 158 .
242.98
Paper was detected later than expected at the
sensor (tray 2 pass-through) or at the sensor (tray
2 trailing edge). Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass-through): Paper arrived too late
service check” on page 160 .