MX-M200D SIMULATIONS 7-17
24 08 Copy counter clear
Used to clear the copy counter.
[OK] key or [START] key: Clears the copy counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
09 Printer counter clear
Used to clear the printer counter and other counters.
Select a counter to be cleared and press [OK] key or [START] key. The confirmation window is displayed.
Press [OK] key or [START] key again, and the specified counter is cleared and the machine returns to the
initial window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
13 Scanner counter clear
Used to clear the scanner counter.
[OK] key or [START] key: Clears the scanner counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
14 SPF/RSPF jam total counter clear
Used to clear the SPF/RSPF jam total counter.
[OK] key or [START] key: Clears the SPF/RSPF jam total counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
(Only when the
SPF/RSPF is
installed.)
15 Scanner mode counter clear
Used to clear the scanner mode counter.
[OK] key or [START] key: Clears the scanner mode counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Main
code
Sub
code
Contents Remark
Sim24-8 COUNTER CLR
AER YOU SURE? EXEC
COPIES
COUNTER
CLEAR
Sim24-9 COUNTER CLR Sim24-9 COUNTER CLR
1:PRINT
2:OTHER
[OK] key or
[START] key
[OK] key or [START] key (Counter clear)
[BACK] key
Numeric key input
1
1:PRINT
2:OTHER
1ARE YOU SURE?
Sim24-13 COUNTER CLR
AER YOU SURE? EXEC
SCAN
COUNTER
CLEAR
Sim24-14 COUNTER CLR
AER YOU SURE? EXEC
SPF JAM
COUNTER
CLEAR
Sim24-15 COUNTER CLR
AER YOU SURE? EXEC
SCANNER MODE
COUNTER
CLEAR
To Next Page
Loading...
