22
INSTALLING THE PRINTER STATUS
MONITOR
Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their
computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error
information such as paper misfeeds, printer configuration information (whether or not a finisher is installed, etc.) as
an image, the paper sizes that can be used, and the amount of paper remaining.
Supported operating systems: Windows 2000
*
/XP
*
/Server 2003
*
/Vista
*
/Server 2008
*
* Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN
(FOR ALL SOFTWARE)" (page 14), perform the steps below.
1
Click the [Printer Status Monitor]
button.
2
Follow the on-screen instructions.
3
When the installation completed
screen appears, click the [Finish]
button.
To have the Printer Status Monitor start
automatically when your computer is started,
select the [Add this program to your Startup
folder] checkbox and click the [Finish] button.
4
Click the [Close] button in the window
of step 1.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file:
Click the Windows [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP Printer Status
Monitor] and then select [Help].
After the installation, a message prompting
you to restart your computer may appear. If
this message appears, click the [Yes] button
to restart your computer.
Note
To Next Page
Loading...
Need help?
General
