27
2
MAC OS 9.0 - 9.2.2
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc
2" on the front of the CD-ROM.
2
Double-click the [CD-ROM] icon ( )
on the desktop.
3
Double-click the [MacOS] folder.
Before installing the software, be sure to read
"ReadMe First". "ReadMe First" is in the
[US-English] folder ([English] folder in areas other
than the U.S.) in the [Readme] folder.
4
Double-click the [Installer] icon ( ).
5
Click the [Install] button.
6
The License Agreement window will
appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
7
Read the message in the window that
appears and click the [Continue]
button.
Installation of the PPD file begins.
After the installation, a message prompting you to
restart your computer will appear. Click the [OK]
button and restart your computer.
This completes the installation of the software.
Next, configure the printer driver settings.
8
Select [Chooser] from the Apple
Menu.
9
Create a printer.
(1) Click the [LaserWriter 8] icon.
If multiple AppleTalk zones are displayed,
select the zone that includes the printer.
(2) Click the machine's model name.
The machine's model name usually appears
as [SCxxxxxx]. ("xxxxxx" is a sequence of
characters that varies depending on your
model.)
(3) Click the [Create] button.
If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter
8" checkbox is selected in "Extensions Manager" in "Control Panels". If not, install it from the system
CD-ROM supplied with your Macintosh computer.
Note
(2)
(3)
(1)
To Next Page
Loading...
Need help?
General
