MX-M182 SIMULATIONS 7-17
24 10 FAX-related counter clear
Used to clear the current FAX send/receive counter value (number of pages of send/receive), the
accumulated time of send/receive, and the print counter to 0.
13 Scanner counter clear
Used to clear the scanner counter.
[OK] key or [START] key: Clears the scanner counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
14 SPF/RSPF jam total counter clear
Used to clear the SPF/RSPF jam total counter.
[OK] key or [START] key: Clears the SPF/RSPF jam total counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
(Only when the
SPF/RSPF is
installed.)
15 Scanner mode counter clear
Used to clear the scanner mode counter.
[OK] key or [START] key: Clears the scanner mode counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Main
code
Sub
code
Contents Remark
SEND
PAGE: xx, xxx, xxx
TIME: hhhhhhhh:mm:ss
EXEC
CLEAR FAX COUNTER
3:PRINT PAGE
(1 - 3) X
Sim24-10 CLR COUN.
RECEIVE
PAGE: xx, xxx, xxx
TIME: hhhhhhhh:mm:ss
EXEC
Sim24-10 CLR COUN.
CLEAR FAX COUNTER
1:SEND
2:RECEIVE
(1 - 3) X
Sim24-10 CLR COUN.
PRINT PAGE
xxxxxxxx
EXEC
[1] key [2] key
[OK] key [OK] key
[OK] key [OK] key
[3] key
[OK] key
[OK] key
When the number of pages of send is cleared, the PC-FAX counter is also cleared.
Sim24-10 CLR COUN.
SEND COUN. CLEARED
Sim24-10 CLR COUN.
RCV COUN. CLEARED
Sim24-10 CLR COUN.
FAX COUN. CLEARED
Sim24-10 CLR COUN.
Sim24-10 CLR COUN.
Return Return Return
CA key : Simulation cancel
Interrupt key : Sub code input window
Sim24-13 COUNTER CLR
AER YOU SURE? EXEC
SCAN
COUNTER
CLEAR
Sim24-14 COUNTER CLR
AER YOU SURE? EXEC
SPF JAM
COUNTER
CLEAR
Sim24-15 COUNTER CLR
AER YOU SURE? EXEC
SCANNER MODE
COUNTER
CLEAR
To Next Page
Loading...
Need help?
General
Weight and Dimensions
