CALLING UP AND USING A FILE
7-23
7
■ Calling up and manipulating a file from the job status screen
Files saved using the "FILE" and "QUICK FILE" functions appear as keys in the finished job status screen.
You can view information on a file that appears in this screen and manipulate the file.
1
Press the [JOB STATUS] key.
The job status screen
appears.
2
Touch the [COMPLETE] key.
The finished job screen
appears.
3
Touch the key of the desired file.
If there are more keys
than can appear in one
screen and the desired
file does not appear,
touch the key or
key to change
screens.
The touched key is highlighted.
4
To view information on the file, touch the
[DETAIL] key.
Use the keys
to change screens.
When you are finished,
touch the [OK] key to
return to the screen of
step 3.
5
Touch the [CALL] key.
The operation selection
screen appears.
Select and perform the desired operation as
explained in "Calling up and using a saved file"
(page 7-15).
To Next Page
Loading...
