Sharp PN-L803C - Page 12

PN-L803C/80TC3 OUTLINE OF THE PRODUCTS 1 - 7
2 – 4. COMPATIBLE SIGNAL TIMING (AV)
Screen resolution Frequency HDMI Component
1920 × 1080p
24Hz Yes -
50Hz Yes Yes
59.94Hz Yes Yes
60Hz Yes Yes
1920 × 1080i
50Hz Yes
Yes
59.94Hz Yes Yes
60Hz Yes Yes
1280 × 720p
50HZ Yes
Yes
59.94Hz Yes Yes
60Hz Yes Yes
720 × 576p
50Hz Yes
Yes
720 × 480p
59.94Hz Yes
Yes
60Hz Yes Yes
640 × 480p(VGA)
59.94Hz Yes
-
60Hz Yes -
720(1440) × 576i
50Hz Yes
Yes
720(1440) × 480i
59.94Hz Yes
Yes
60Hz Yes Yes
2 – 5.POWER MANAGEMENT
This monitor conforms to VESA DPMS. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DPMS：Display Power Management Signaling
DPMS Screen Power consumption *1 Hsync Vsync
ON STATE Display 280 W Yes Yes
STANDBY
No
display
6.0 W
*2
No Yes
SUSPEND Yes No
OFF STATE No No
* When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
2 – 6.DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.