Sharp PN-L803C - Handle

PN-L803C/80TC3 DISASSEMBLY AND ASSEMBLY 6 - 2
■UL Tape, Clamp position
 : Black clamp : CLAMP LHLDW1019MPZZ
 : Transparent clamp : HOLDER (TKK LWCN-30A) LHLDWA176WJUZ
 : UL tape : TAPE ZTAPEP179050E
 : White wire saddle : HOLDER RMS-3V0 LHLDW1970FCPZ
 : White long clamp
2. HANDLE
1) Remove the 16 screws (M6x14 SW+W (Black)), and remove the Handle and the Handle Cover.