PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 5
Signal type Name Contents
Other Touch pen adapter port - Connect the touch pen adapter in order to use the touch pen.
USB 1 (type B) port
- To use the touch panel with the computer connected to the
bottom, connect the touch panel to the computer with the USB
cable. (Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
USB 2 (type B) port
- To use the touch panel with the computer connected to the side,
connect to the computer with the USB cable. (Factory setting.
Can be changed in TOUCH INPUT SELECT in the SETUP
menu.)
RS-232C input terminal
- The monitor can be connected to a PC using the RS- 232C
conversion cable (supplied) and a commercially available
RS-232 straight cable to control the monitor from the PC.
LAN terminal
- You can control the monitor from a computer on a network by
connecting a commercially available LAN cable between this
terminal and a network.
USB cable
- To use the USB port on the fornt of the tray (for USB device)
(USB 2.0 compliant), connect the USB cable to the USB port on
the computer.
* The touch panel must be connected separately.
To Next Page
Loading...
