PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 8
1 – 6. REMOVING THE HANDLES
The handles can be removed.
(CAUTION)
- The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
- To attach handles, be sure to use the handles and handle screws which were removed from the monitor.
- Be sure the handles are attached securely.
1 – 7. MOUNTING A WEB CAMERA
It is possible to mount a commercially available web camera in the following positions:
(2)
(1)
*
1 – 8. ATTACHING THE TRAY
Push until the tabs lock
into place (4 places)
Tray mount fitting
Tabs (4 places)
(CAUTION)
When attaching the tray, do not pinch the USB cable on the back of the tray.
(1) Attach the supplied camera mount with the supplied camera mount
screws (x2).
(2) Attach the web camera to the camera mount with the supplied
camera screw (inch thread) (x1).
* The camera mount cannot be attached when the tray is attached. To
attach the camera mount, remove the tray mount fitting.
To Next Page
Loading...
