>>
<<
Direct Button Operation
AUDIO
Press AUDIO to toggle between multi channel audio.
Sleep Timer
Allows you to set a time when the Monitor automatically
switches to standby.
Press SLEEP.
The remaining time displays when the sleep timer has
been set.
Each time you press SLEEP, the remaining time switches
as shown below.
When set, the time automatically starts counting down.
If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
NOTE
Select "Off" by pressing SLEEP to cancel the sleep timer.
The Monitor will enter standby when the remaining time
reaches 0.
ENG 3-4
To Next Page
Loading...
Need help?
General
