>>
<<
On-Screen Display Menu
Example
Initial Setup
NOTE
For operating the on-screen display menu,
see page 4-3.
Easy Setup
You can change the settings of the Initial Installation.
Language: Select from among 6 languages (English,
French,Spanish, German, Italian and Russian).
Power Saving: Select "Yes" or "No" to configure default
Display settings.
Yes: AV MODE is set to "STANDARD" and Automatic Light
Sensor is set to "On".
No: AV MODE is set to "DYNAMIC (Fixed)" and Automatic
Light Sensor is set to "Off". Picture Reset can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
even after 30 minutes elapses, AV MODE is not reset to
"DYNAMIC (Fixed)".
Completed: The settings confirmation screen is displayed.
Confirm the information displayed on the screen.
NOTE
See Initial Installation on
pages 2-2 to 2-4 for setting each item.
Language
You can also select a language from the Initial Setup menu.
Select from among 6 languages: English, French, Spanish,
German, Italian and Russian.
NOTE
To change the language of the manual, select "MENU" >
"Initial Setup" > "Language" to change the language.
Then, press MANUAL again.
ENG 4-5
To Next Page
Loading...
Need help?
General
