Sharp PN-Q701

>>
<<
On-Screen Display Menu
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to operate the
menu.
MENU: Press to open or close the menu screen.
/ / / : Press to select a desired item on the screen or
adjust a selected item.
ENTER: Press to go to the next step or complete the setting.
RETURN: Press to return to the previous step.
Using the control panel of the Monitor
You can also operate the menu with the control panel of the
Monitor.
Button operations on the control panel correspond to the ones
on the remote control as shown below.
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
CH / : Cursor / on the remote control.
VOL+/-: Cursor / on the remote control.
ENG 4-4