>>
<<
Specifications
Monitor (For PN-Q901 model)
Item Model: PN-Q901
LCD panel
Size 90" Class (90 1/64" Diagonal)
Resolution 2,073,600 pixels (1,920 x 1,080)
Audio out 10W x 2
Terminals
Back panel vertical side
HDMI IN 1 HDMI in with HDCP, ARC
HDMI IN 2 HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
HDMI IN 3 HDMI in with HDCP, MHL
USB Photo/Music/Video mode, Software update, USB keyboard/mouse
Back panel surface side
COMPONENT IN COMPONENT IN
VIDEO IN 1 AV in
AUDIO OUT Audio out
PC IN ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in (Ø 3.5 mm stereo jack)
RS-232C 9-pin D-sub male connector
Back panel horizontal side
AUDIO IN Audio in (Ø 3.5 mm stereo jack)
DIGITAL AUDIO OUT Optical Digital audio out x 1 (PCM/Dolby Digital/DTS)
ETHERNET Network connector
OSD language English, French, Spanish, German, Italian and Russian
Power Requirement AC 110-240 V, 50/60 Hz
On Mode Power 211 W
Power Consumption 290 W (0.5 W Standby with AC 230 V)
Weight
Monitor + stand 150.0 lbs./68.0 kg
Monitor only 141.1 lbs./64.0 kg
Dimensions*2
W x H x D inch (mm)
Monitor+ stand 80 7/8 (2054) x 48 61/64 (1243) x 17 3/32 (434)
Monitor only 80 7/8 (2054) x 47 11/16 (1211) x 4 37/64 (116)
Operating temperature 0°C to +40°C
As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in individual units.
ENG 10-1