>>
<<
Using LINK Operation
Link Operation Menu (Continue)
Show Start Menu
You can call up a setup menu from the connected LINK-
compatible equipment.
NOTE
Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
Change Audio Output Device
You can select to listen to the Monitor sound only from the
LINK-compatible audio system.
Audio Return Channel: The sound from the Monitor
speaker is muted and only the sound from the LINK-
compatible audio system is audible.
• You can use VOL+/- and MUTE.
Built-in Speaker: The sound is output from the Monitor
speaker.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy chain, you
can specify which device to control here.
Press / to select the desired device from a list of
connected HDMI devices, and then press ENTER.
HDMI CEC Link
You can also display the HDMI CEC Link screen from the
Link Operation Menu.
ENG 6-4
To Next Page
Loading...
