Sharp PN-T321 - Connecting the Power Cord

10
E
Connecting the Power Cord
Caution
• Do not use a power cord other than the one supplied with
the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
TIPS
• Insert the power code through the claw at the bottom of the monitor (left side of the monitor if oriented vertically).
For the monitor in horizontal orientation For the monitor in vertical orientation
AC input terminal
1
Main power switch
Power cord (Supplied)
For power
outlet
2
3