‘~
SF-7300
SF-7350
C. Lens
(1) Remove the kne base =ver.
(2) Remove the kne fromthe lensoarriege.
Remove the lens.
L
Lens number
Lensoerriege
D. Lensdrive wire (SF-7350 only)
(Removingthelensdrivewire)
- (1)Removetheknsbasecover.
(2)Removethernotorbra~etassy.
(3)Loosenthetensionpulkyangleh~ing wrewand-en the
wiretension.
Tensionpul
(4) Loosen the wire h~r R hoHirrgSUW.
Remove the wirefromthe kne ~age.
(~ Remove the wireend h~rtiom the knetiage.
(6) Remove the wire.
Wire hotier R
htiing S=-
\
Wire end froMer
~tretchlng the lens drive wire (SF-7350
only)
When r@acing the drtvewire, tisen the tensionpulby hofding
angk s=ew to rdease tension.
(1) Move the lens mrriage unitto the normalposkion(x1.0).
Match the
LPSto the normalpositionof the slitplate.
8–7
(2) Inserttwo stoppine (M8 x 10 ~ew~ldo) inthe~md~. - ‘
.
(3) Insert the wire through the ~tion A. (Route through and
underthe
clutch@nndkn shsR.)
(4) Insetithe metal end at the btion of No.(l).
(5) Routethe wire in orderof No.(2) to No.(13)
At (10), insertthe wire between the tire clamp R and the lens
carnagewire htiirrg bratiet.
(6) Insertthe end of fhewire intoNo.(14).
@
w
(~ Faetenthetirectip Rfi~ert~twith screw.
(8) Removethe stoppin (esrew) intheoamdmm.
(9) Manu4fy move the ~~e towards the
arrowdir-ion (P),
match the line (A) at the edged
ahobin the bae~ate with
(
the he (B) at the edge of the km satiage, and fasten the
wke clamp R =rew.
Whn tie lens cdege b to be moved, hoM the kne d~e
gear and do nothofdthe sanfaga bff.
( )
Wire
To Next Page
Loading...
