Sharp TU-GA1U-S - Preparation (Continued); Removing Speakers

14
Removing speakers
Preparation
1
2
3
5
4
LC-32G4U
NOTE
• Perform the same steps for right speaker.
• To attach the speakers, perform the steps in reverse order.
Unfasten the screw used to secure the speaker
bracket.
Take off the speaker cable cover.
Take off the speaker terminal cover. Unfasten the screws.
Disconnect the cable from the speaker.
CAUTION
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.
LC-32/37G4U(E)-01-19 04.4.7, 2:25 PM14