Sharp TU-GA1U-S - Useful Adjustment Settings (Continued); Audio Only Mode and Output Selection

74
Useful adjustment settings
Description
• Sound via speaker is adjusted with VOL
k/l on the remote control unit or VOL l/
k on the Display.
• Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
• Sound via the MONITOR OUTPUT terminal
is adjusted with VOL k/l on the remote
control unit or VOL l/k on the Display.
• Sound via speaker is muted.
Selected item
Fixed
Variable
Output Select
Allows you to select what controls the audio output.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “Output Select”, and
then press ENTER.
3
Press c/d to select “Fixed” or “Variable”,
and then press ENTER.
4
Press c/d to select “Option”.
MENU
[
Option
...
Output Select
]
Option
Input Select
Digital Noise Reduction
Output Select
Audio Only
Quick Shoot
[Fixed]
[Auto]
[Low]
[Off]
Center Channel Input
Caption Setup
[Off]
VariableFixed
(On-screen display for AV input mode.)
4
OffOn
Press c/d to select “On”, and then press
ENTER.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Audio Only”, and then
press ENTER.
1
2
3
MENU
[
Option
...
Audio Only
]
Option
Input Select
Digital Noise Reduction
Output Select
Center Channel Input
Caption Setup
Audio Only
Quick Shoot
[Fixed]
[Off]
[Auto]
[Low]
[Off]
Audio only
When listening to music from a music program, you
can set the Liquid Crystal display off and enjoy audio
only.
(On-screen display for AV input mode.)
Description
Audio is output without screen image.
Both screen images and audio are output.
Selected item
On
Off
LC-32/37G4U(E)-74-88 04.4.7, 2:36 PM74