Sharp TU-GA1U-S - Useful Adjustment Settings (Continued); Speaker Selection and Audio Quality Control

66
Selecting speakers
You can output audio using the supplied speakers or
other external speakers.
Press c/d to select “SPEAKER-A” or
“SPEAKER-B”, and then press ENTER.
5
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Speaker Setup”, and
then press ENTER.
1
2
3
Useful adjustment settings
Press a/b to select “Speaker”, and then
press ENTER.
4
Speaker
Audio Quality Control
SPEAKER-A SPEAKER-B
Audio Quality Control
Audio Quality Control automatically optimizes the audio
quality to suit internal (supplied) speakers.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
Press c/d to select “Equalizer” or “Flat”, and
then press ENTER.
5
Press a/b to select “Speaker Setup”, and
then press ENTER.
3
Press a/b to select “Audio Quality Control”,
and then press ENTER.
4
Speaker
Audio Quality Control
Equalizer Flat
Description
Speakers connected to the Display.
Speakers connected to the AVC System.
Selected item
SPEAKER-A
SPEAKER-B
Description
Sets the optimum Audio Quality Control for
the attached speakers.
When you are using your own speakers,
output the original sound without using
Audio Quality Control.
Selected item
Equalizer
Flat
NOTE
• When DOLBY Virtual is on, Audio Quality Control
automatically sets to Flat.
LC-32/37G4U(E)-63-73 04.4.7, 2:34 PM66