75
Useful adjustment settings
Quick shoot
Use Quick Shoot Operation to record action video more
clearly.
1
2
3
4
MENU
[
Option
...
Quick Shoot
]
Option
Input Select
Digital Noise Reduction
Output Select
Audio Only
Quick Shoot
[Fixed]
[Auto]
[Low]
[Off]
Center Channel Input
Caption Setup
[Off]
OffOn
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Quick Shoot”, and then
press ENTER.
Press c/d to select “On”, and then press
ENTER.
NOTE
• Quick Shoot may cause image noise. If this occurs turn
the function “Off”.
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
Sleep Timer: 0
30
60
90
120
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
1
2
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before time expires, the remaining
time displays each minute.
NOTE
• Select “0” by pressing SLEEP to cancel the sleep timer.
• If the sleep timer is activated when set to zero, the system
will enter STANDBY mode.
Sleep Timer: Remaining
30
(On-screen display for AV input mode.)
LC-32/37G4U(E)-74-88 04.4.7, 2:36 PM75
To Next Page
Loading...
