Sharp TU-GA1U-S - Using Memory Card (Continued); Deleting Still Image Files

51
Using memory card
Deleting all still image files
5
6
Press a/b to select “File Operation”, and
then press ENTER.
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Card Setup”.
4
Press a/b to select “Still Setup”, and then
press ENTER.
MENU
[
Card Setup
...
Still Setup
]
Card Setup
Video Setup
Still Setup
Format
Slide Show
My Program
Audio Select
File Operation
Protect
Delete File
Delete All
Press a/b to select “Delete All”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
7
Deleting a still image file
5
6
Press a/b to select “File Operation”, and
then press ENTER.
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Card Setup”.
4
Press a/b to select “Still Setup”, and then
press ENTER.
MENU
[
Card Setup
...
Still Setup
]
Card Setup
Video Setup
Still Setup
Format
Slide Show
My Program
Audio Select
File Operation
Protect
Delete File
Delete All
Press a/b to select “Delete File”, and then
press ENTER.
7
Press CARD and the card mode screen
displays.
1
Press a/b/c/d to select the file you want
to delete, and then press ENTER.
8
Press c/d to select “Yes”, and then press
ENTER.
Press CARD and the card mode screen
displays.
1
NOTE
• You cannot delete a protected file on the card.
• Do not turn off the power or take out a card when deleting
a file. The card may malfunction.
NOTE
• You cannot delete a protected file on the card.
• Do not turn off the power or take out a card when deleting
a file. The card may malfunction.
9
Repeat the operations in steps 7 and 8
above.
10
After deleting the images you no longer need,
press RETURN to return to MENU.
Still Video
File 1 File 2 File 3
File 4 File 5 File 6
File 7 File 8 File 9
LC-32/37G4U(E)-44-56 04.4.9, 10:56 AM51