Batch Page Numbering
You can change the page numbering of the transmitted document from
simple numbering ("P.01", "P.02", etc.) to batch numbering, which
means that a slash and the total number of pages being sent are added
after each page number (for example, "P. 01/05", "P.02/05", etc.). This
allows the receiver to check for missing pages.
1
Load the document(s).
•• The document must be loaded
before batch page numbering can be
set.
2
Press these keys:
The display will show:
FUNCTION
PAGE COUNTER SET
3
Enter the total number of pages ("01"
to "99") by pressing the number keys.
•• If you are sending a cover sheet, do
not include it in the total number of
pages (the number will be adjusted
automatically).
8
0
Example:
Eight pages
4
Dial the receiving machine and
transmit the document.
Batch Page Numbering
100
To Next Page
Loading...
