Sharp UX-460 - Page 114

Setting 2: NUMBER OF RINGS TO ANSWER
This option sets the number of rings the fax machine waits before
answering an incoming call in FAX reception mode. Enter any number
from 1 to 5 rings.
• Initial setting: 4
FUNCTION
4
Press
until
display
shows:
NUMBER OF RINGS
Enter a number
from
1 to 5
RECALL INTERVAL
STOP
Setting 3: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic
redials when the line is busy. Enter 01 for 1 minute, 02 for 2 minutes,
etc., up to a maximum of 15 minutes.
• Initial setting: 05
FUNCTION
4
Press
until
display
shows:
RECALL INTERVAL
Enter a number
from
01 to 15
RECALL TIMES
STOP
Setting 4: RECALL TIMES
This sets the maximum number of times your fax will automatically
redial if the line is busy. Enter any number from 00 to 10.
• Initial setting: 02
FUNCTION
4
Press
until
display
shows:
RECALL TIMES
STOP
Enter a number
from
00 to 10
TEL/FAX REMOTE #
Option Settings
112