Direct Keypad Dialing
You can also enter a full number with the number keys and then press
the START/MEMORY key to begin dialing. You can use this
method to dial a full number when you don’t need to speak to the
other party before faxing.
1
Load the document(s).
The display will show:
READY TO SEND
••
Set the resolution and/or contrast if
desired.
RESOLUTION
2
Enter the number of the receiving
machine by pressing the number keys.
•• If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key (two seconds per
pause). The pause will appear as a
hyphen. Several pauses can be
entered in a row.
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
3
Check the display. If the number of the
receiving machine shown is correct,
press the START/MEMORY key.
•• If it is not correct, press the STOP
key to backspace and clear one digit
at a time, and then re-enter the
correct digit(s).
START/MEMORY
3. Sending
Documents
Sending a Fax by Automatic Dialing
73
To Next Page
Loading...
