Sharp VC-A410X

g Recording Hi-Fi Stereo Sound _____________
(Only for VC-H610X)
This VCR automatically records audio signals on two kinds of audio tracks.
Hi-Fi: Using specialized rotary heads, audio signals are recorded on the video track in the FM
format. Multnsound broadcasts (stereo or bilingual programmes) are automatically recorded
on two channels.
Normal: Audio signals are recorded monaurally on the linear track. Stereo broadcasts are recorded in
mono, and only the main audio track of bilingual programmes is recorded.
• Video cassettes recorded on a non-HFFi VCR can also be played back. However, if the audio signals are recorded
on two linear channels, stereo programmes will be played back monaurally and bilingual programmes will be
played back with both the main and sub audio tracks mixed together.
♦ Video cassettes recorded on this VCR can be played back on a non-Hi-Fi VCR. However, only the normal (linear)
track will be played back.
Switching Input Signals
Various sources of video and audio signals can be recorded as shown in the following chart.
(a) Selecting a channel will record both video and audio from the VCR tuner.
(b) Selecting an external source position (to select an external source position, press the INPUT
SELECT button or select a channel situated between the last channel and the first channel with the
CHANNEL ® / Q buttons) will record both video and audio from an external source via the back-
panel AUDIO/VIDEO LINE 1 or front LINE IN 2 terminal.
Input mode
TV screen
Signals Recorded
Video track ] Normal audio track Hi-Fi audio track
Tuner
Signals from tuner
External 1
(LINE 1)
Signals from AUDIO/VIDEO (LINE1) socket on the rear of the VCR
External 2
(LINE 2)
Signals from LINE IN 2 terminal on the front of the VCR
Recording Audio Only
This VCR can record Hi-Fi audio-only signals.
O Connect the audio source (CD player, etc.) to the AUDIO-IN L/R terminals on the front or rear of the
VCR.
Q Select the connected external position LINE IN 1 or 2 ( “ L1 ” or “ L2 ” lights up) by pressing the
INPUT SELECT button or the © f Q buttons.
© Press the TAPE SPEED button on the remote control to select SP or LP mode.
© Press the REC button..
23