Sharp VC-A410X

Using the Remote Control for TV Operation
(Only for VC-H610X)
The provided remote control can operate the basic functions of your television. In addition to most
Sharp televisions, other manufacturers' televisions listed below can also be controlled by setting the
remote control to the corresponding TV brand. The remote control's default brand is "SHARP*, which
enables control of most Sharp televisions. When you replace the batteries in the Remote Control, the
control ’ s TV brand setting will be reset to SHARP.
Setting the TV Brand
O Turn on your TV.
© Press the OPERATE button and the button
simultaneously which corresponds to the
brand of your TV. Hold the button down for
about one second.
Refer to the table of brands below.
When setting is complete, the remote control
will send a “ power off 31 signal (6) to the TV,
and it should turn off,
• If the TV does not turn off in step @ repeat the step
@ setting procedure and select the button for a
different brand.
(For example)
TV brand: SHARP
(Corresponding
button is “ 1 ” )
Press these -------
buttons
simultaneously
and hold for more
than 1 second.
CHANWt
CD ® CD
TV BRAND NAME
Corresponding button
TV BRAND NAME
Corresponding button
SHARP
PHILIPS
THOMSON
TELEFUNKEN
SELECO
NORDMEND
SONY
IlllOllfllll:
TOSHIBA
PANASONIC
TELAVIA
■■■■»
GRUNDIG
INPUT SELECT
BLAUPUNKT
MITSUBISHI
CHANNELS
FERGUSON
JVC
CHANNEL ©
ITT NOKIA
SSHlKSIllI
TV Functions to be Controlled
Switch to TV control mode.
• Press the TV button to select the TV control mode.
Return to VCR control mode.
♦ Press the VCR button to select the VCR control mode.
TV function control
O Press the TV button to select the TV control
@ Use the following buttons on your remote
control to operate your TV set.
TV function
•TV POWER (6)
•TV CHANNEL UP/DOWN
.♦TV VOLUME UP/DOWN
> INPUT SELECT button (TV-AV selector)
© Press the VCR button to return to the VCR
control mode.
♦ When you replace the batteries in the remote control,
if your television is not a Sharp model you must reset
the TV brand.
• If the MENU, PLAY, STOP, FF or REW buttons are
pressed in the TV control mode, the VCR will return to
VCR control mode.
IMPORTANT NOTE:
Although the provided remote control unit is compatible with most
SHARP televisions, as well as many TV models manufactured by
others, it is possible that the provided remote control will not work with
your TV, or will control only some of the functions.
If the button listed in the table does not work with your TV set, you may
want to try another; occasionally, models vary within a brand.
Consequently, Sharp's warranty does not cover all of the models under
the brands listed in the table.
7