Sharp VC-A410X

Setting the Channels
MANUAL TUNING
PREPARATION
• Select the video channel on your TV. Press the OPERATE button to turn on the VCR.
Example: Tuning Channel Position 3 to Broadcast TV Channel 7
I NOTE >
• Numeric buttons on the remote control can also be used to select channel numbers. Press the 7- button to switch
between one and two digit numbers for step ©
MENU
o»
MENU
TIMER
MODE
CLOCK
LANGUAGE
SELECT :A ▼
ENTER :SET EXIT '.MENU
I J
A SET
O Press the MENU button.
Select item “ CHANNEL PRESET ” with the A / ▼
buttons and press the SET button.
Z ------ -- --- ---- - —
CHANNEL PRESET
AUTO ________________________________
SELECT :▲ ▼
ENTER :SET EXIT : MENU
A SET
v»©
Q Select item “ MANUAL ” with the A or ▼ buttons
and press the SET button.
INOTE >
• CHANNEL PRESET has been preset to MANUAL at
the factory.
Numeric
buttons
or
◄ /►
[Preset CH]
B preset ch BEI
CHANNEL 25
FINE TUNING ◄ ►
SKIP ON E9
SELECT :▲ ▼ CHANGE: ◄ ►
ENTER sSET EXIT sMENU
I _______________________________________ J
* ▼
© Select the preset channel position number with
the numeric or ◄ / ► buttons, and then press
the ▼ button.
Numeric
buttons
or
[Broadcast CH]
PRESET CH 3
^CHANNEL QQ
FINE TUNING ◄ ►
SKIP ON QEB
SELECT :▲ ▼ CHANGE ►
ENTER :SET EXIT : MENU
♦ ▼
0 Press the numeric buttons or the ◄/► buttons
until you see the desired broadcast channel on
your TV, and then press the ▼ button.
[Fine tuning]
O - ™ ™ i.™, mr r. mrnrTw.w™,
PRESET CH 3
CHANNEL 07
B fine TUNING EHC
SKIP ON Q23
SELECT :▲ ▼ CHANGE :◄ ►
ENTER tSET EXIT : MENU
I _______________________________________ 4
◄
or
►
0 For fine tuning, press the ◄ or ► button until the
broadcast channel comes in clearly on your TV.
SET Next
O Screen
0 If you wish to preset more channels, press SET
button and repeat steps 0 through 0.
menu Normal
Qj Screen
0 To return to the Normal Screen, press the MENU
buttons.
1.3