Sharp VC-A410X

R Auto Repeat
With this feature, the entire tape is played back repeatedly.
O Set the REPEAT mode on the MODE-selection screen to ON.
When the video cassette reaches its end, the VCR will stop
playback, rewind the tape, and automatically play it back
again.
I NOTE >
COLOUR
BLUE BACK
AUTO RENTAL
E repeat
JUST REC
• The ON/OFF status of the Auto Repeat can be checked on the MODE Selection screen. (See Mode Selection on
page 16.) (And when the AUTO REPEAT is ON, “ REPEAT ” will be displayed on the OSD screen.)
• If the Auto Repeat is on and the tape is rewound to the beginning with rewind or reverse video search, the tape will
automatically start playback.
rc Skip Search
SKIP SEARCH
When the SKIP SEARCH button on the remote control is pressed during playback
mode, the VCR will perform a forward video search for a fixed interval of playback
time before resuming playback. Depending on hoW many times the button is pressed,
it is possible to set the forward video search time to approx. 30, 60, 90 or 120
seconds of recorded material.
During skip search, the interval of the video search will flash on the display.
Number of Times Pressed Forward Video Search Time
(On the VCR display)
1 time
Approx. 30 sec.
(of playback time)
x. \ I / /
_ n r/ n _
J
x /  \
2 times
Approx. 60 sec.
(of playback time)
. \  / .
i n n
~ /• u u~
" /  \
3 times
Approx. 90 sec.
(of playback time)
. \  / .
/ □ n
~ 1 ’ J u~
x /  \ ^
4 times
Approx. 120 sec.
(of playback time)
. \  / .
_ J n n_
x /  \ x
(Only for VC-H610X)
When the button on the remote control is pressed during playback, the VCR will
perform a reverse video search for a fixed interval of playback time before resuming
playback. Depending on how many times the button is pressed, it is possible to set
the reverse video search time to approx. 20, 40, 60, or 80 seconds of recorded
30